User Manual
Table Of Contents
- Introduction
- General Safety Information
- 1. Learn More About the Nova3D BENE4
- 2. What’s in the Box
- 3.Main Components
- 4.Nova3D Printing Technology Glossary
- 5.Preparation before use
- 6. Connecting the Printer to a Network
- 7. Firmware Update
- 8. Navigating Through the Menu
- 9. NovaMaker Software
- 10. Starting and Post-Processing
- 11. Available Materials
- 12. Basic Maintenance and Service Work
- 13. Support and Troubleshooting
- 14. Specification
- 15. Recycling
深圳市诺瓦机器人技术有限公司
Shenzhen Nova Robot Technology Co., Ltd.
18
to a network via Wi-Fi or Ethernet. Go to Settings and configure the connection using options
from the menu.
Select the "Network Settings" menu in "Settings" of the machine control menu, and set
WiFi connection according to the network settings; Make sure the printer is properly connected
to the network. After setting up (a string of address information is displayed at the current IP
address), the device is ready to print.