User Manual
Table Of Contents
- Introduction
- General Safety Information
- 1. Learn More About the Nova3D BENE4
- 2. What’s in the Box
- 3.Main Components
- 4.Nova3D Printing Technology Glossary
- 5.Preparation before use
- 6. Connecting the Printer to a Network
- 7. Firmware Update
- 8. Navigating Through the Menu
- 9. NovaMaker Software
- 10. Starting and Post-Processing
- 11. Available Materials
- 12. Basic Maintenance and Service Work
- 13. Support and Troubleshooting
- 14. Specification
- 15. Recycling
深圳市诺瓦机器人技术有限公司
Shenzhen Nova Robot Technology Co., Ltd.
17
film of the screen, and keep the 2K screen and the platform free of sundries, plug in the
power, and press the power button to start the machine.
2. Place a folded A4 paper in between the printing plate and 2K screen. Go to the menu, hit
the calibration in the "control" sub-menu then the plate will go down to calibrate.
3. When the printing platform stops, move the A4 paper back and forth to feel the resistance
and checking the distance. If the A4 paper is removable with feeling the resistance evenly,
please hold the plate on its sides and tighten the calibration screws on the top by allen key.
If no friction is felt, please lift down the printing plate by minimum 0.05mm , move the paper
until the friction in between is felt evenly and tighten the calibration screws as mentioned
above.Please hit save and confirm to finish the calibration.
If there is any unclear, please refer to the NOVA 3D technical video website:
http://www.nova3dprinter.com/docs/index.html
Start Printing
Place the printer on a flat and stable desktop and ensure that the desktop is flat and not
shaking. Clean the FEP film and the LCD screen with a cloth.
Plug in the power adapter and press the front panel power to turn on the printer. Connect it