User Manual
Table Of Contents
- Introduction
- General Safety Information
- 1. Learn More About the Nova3D BENE4
- 2. What’s in the Box
- 3.Main Components
- 4.Nova3D Printing Technology Glossary
- 5.Preparation before use
- 6. Connecting the Printer to a Network
- 7. Firmware Update
- 8. Navigating Through the Menu
- 9. NovaMaker Software
- 10. Starting and Post-Processing
- 11. Available Materials
- 12. Basic Maintenance and Service Work
- 13. Support and Troubleshooting
- 14. Specification
- 15. Recycling
深圳市诺瓦机器人技术有限公司
Shenzhen Nova Robot Technology Co., Ltd.
15
UV Cover
The cover placed on top of the printer responsible for protecting liquid resin from ambient UV
light. It also helps to keep unpleasant smells of resin inside the printing chamber.
Support Structure
Special 3D printed structures in the form of pillars which ensure that the whole model
adheres to the platform and doesn’t fall into the resin vat during the printing process. Supports
are printed with the same material as the model. Once the printing is done, supports have to be
removed from the model by hand or using pliers.