User Manual
Table Of Contents
- Introduction
- General Safety Information
- 1. Learn More About the Nova3D BENE4
- 2. What’s in the Box
- 3.Main Components
- 4.Nova3D Printing Technology Glossary
- 5.Preparation before use
- 6. Connecting the Printer to a Network
- 7. Firmware Update
- 8. Navigating Through the Menu
- 9. NovaMaker Software
- 10. Starting and Post-Processing
- 11. Available Materials
- 12. Basic Maintenance and Service Work
- 13. Support and Troubleshooting
- 14. Specification
- 15. Recycling
深圳市诺瓦机器人技术有限公司
Shenzhen Nova Robot Technology Co., Ltd.
10
Use of Tools
Platform: The model is adhered to the platform during the printing process.
Resin Vat: A container for resin material.
Power Cable: Connect to the power supply.
Filter : Filter the cured remains in the used resin.
Gloves: Protect hands from injury.
USB Flash Drive: Contains NovaMaker software User Manual, e-manual, model file, etc.
Spatula: Use to check if there are residues of cured resin in the vat before each printing
process.
Pliers: Use to cut off the model support.
Spray Bottle: Spray alcohol to clean the residual resin on the model.
Spare Screws: Spare screws for securing FEP film, LCD screen and device base.
Hex Wrench: The disassembling tool for maintenance and replacement of parts.
FEP Film: A film installed at the bottom of the vat to separate the model.
Quick User Guide: Help you to get started quickly.