VisionNova 5 2009:Layout 1 30-10-09 14:25 Side 3 Setup 1. Camera The camera uses either the integrated battery or the accompanying AC adapter. The battery charges when the AC adapter is used. The power indicator LED flashes while the battery is charging (red if the camera is off and green if it is turned on). When the camera is fully charged the indicator switches off or, if the camera is turned on, is a constant green.
VisionNova 5 2009:Layout 1 30-10-09 14:25 Side 4 2 Monitor 2.1 LCD screen Signal indicator. This behaves like a mobile phone, showing whether the signal is strong or weak. It is normal for the signal strength to vary, even over short distances! Alarm symbol. Shown if an alarm is set. GB Battery indicator. Shows the remaining battery life using 4 levels. Becomes transparent and flashes when the battery is empty. The monitor uses a rechargeable 3.
VisionNova 5 2009:Layout 1 2.3 30-10-09 14:25 Side 5 Sound indicator The LEDs show whether the child is making a sound, even if the volume is adjusted down. 3.0 Menu The monitor has a self-explanatory menu. You enter the menu by pressing the OK/Menu button, navigating with the arrow buttons (M, L) and selecting the indicated item with the OK/Menu button. You move backwards or out of the menu by pressing the On/Esc button. If no button is pressed for 20 seconds, the menu closes.
VisionNova 5 2009:Layout 1 30-10-09 14:25 Side 6 Settings This provides a new menu for you to choose from: Date and time Date: Set todayʼs date. Use OK/Menu to move between the fields Time: This sets the clock and is shown in 12/24 hour format depending on what you choose in the next menu item. GB Time format: Choose 12 or 24 hour format. Close Video Time: Choose whether the screen should shut down and after how many seconds.
VisionNova 5 2009:Layout 1 30-10-09 14:25 Side 7 Troubleshooting If no image is visible. • Check that the camera and monitor are turned on. • Check that the link indicator is green. If not, search for the camera again (see above). • Check that the adapter plugs are all the way in. • If the camera or monitor is running on battery power, use the adapter and charge the batteries.
