Operation Manual
10
Steam Station 4 BAR Article 320180 / 320181
5 Set the steam generator switch (nr.11)
to ‘on’. The steam generator will now
heat the water, and the stand-by light
on the base’s control panel (nr.15) will
light. Once the water has reached the
required temperature, the light will be
extinguished.
6 Adjust the quantity of steam to the
required level by turning the steam
quantity knob (nr.9) to the desired
position.
7 Adjust the temperature by turning the
iron’s temperature-control dial to the
required setting. Adjust the temperature
in accordance with the directions given
in table 1.
Table 1
8 The temperature indicator light on the
iron is illuminated whilst the iron is
heating up, and is extinguished once
the iron has reached the set
temperature. You can now start ironing.
9 Whilst you are ironing you can give a
shot of steam by sliding the iron’s steam
button (nr.3) back and then pressing it
down with your index finger. (see figure
2)
10 When pausing during ironing, return the
iron to the holder on the steam
generator.
11 When you have finished ironing return
the iron to the holder on the steam
generator, switch the appliance off and
remove the plug from the wall socket.
12 Allow the appliance to cool.
Refilling the water reservoir
• The steam station is protected with a
safety valve: you can only unscrew the
cap of the water reservoir when the
pressure has lowered to below 1 bar.
1 When the water level in the reservoir is
too low, the water-level indicator light
(nr.16) on the steam generator's
housing lights.
2 Switch off the steam generator and the
irons on/off-switch to let the appliance
cool down.
3 You may want to push the steam button
to lower the pressure in the water
reservoir faster.
4 When the pressure has lowered
sufficiently, unscrew the cap.
5 Refill the reservoir, but be careful not to
exceed the ‘max’ level.
Label Type of
fabric
Material Temp.
The fabric may not be ironed.
Synthetic Acryl
Modacrylic
Poly-
propylene
Poly-
urethane
Synthetic Acetate
Triacetate
Synthetic Metal
Cupro
Polyamide
(nylon)
Polyester
Modal
Viscose
Silk Silk
Wool Wool
steam or
dry
Cotton Cotton
steam or
dry
Linen Linen
Label Type of
fabric
Material Temp.