Instruction Manual

Page 15 of 48
© Adam Equipment Company 2007
14 TOLAS T All 0.085735323 11.663804
15 TICAL ti All 0.0612395 16.32933
16 NEWTONS N All 0.00980665 101.921623
17 CUSTOM Custom All As specified As specified
It is possible to set the balance to display only grams. Grams will always be
one of the units selected, by default.
The balance displays the alternate weighing units with as much precision as
possible. For example, the 250g x 0.0001g balance could weigh up to:
Unit Maximum d =
g 250g x 0.0001g
mg 250000.0 0.1
ct. 1250.0000 0.0005
dwt 160.7537 0.0001
GN 3858.090 0.002
ozt 8.037685 0.000005
oz 8.818490 0.000005
lb 0.551150 0.000001
dr 141.0958 0.0001
tl.T 6.666675 0.000005
tl.H 6.679310 0.000005
tl.S 6.613865 0.000005
MM 66.6665 0.0005
T 21.43383 0.00001
ti 15.30987 0.00001
N 2.451662 0.000001
9.4 FUNCTIONS
When weighing, the user can access the applications that have been enabled
(see section 13.2).
The following applications are available in this version:
• Weighing
• Parts counting
• Percent weighing
• Check weighing
• Animal / dynamic weighing
• Net/Total
• Density determination
The selectable functions can be enabled using a similar method to the Units
above by turning the functions on or off.