Instruction Manual

Page 14 of 48

9.3 WEIGHING

• Press [0/T] to zero the balance, if required

• “0 “ will be displayed

• Place a mass on the pan and the weight will be displayed

• If a container is used press [0/T] to tare the balance when the

balance symbol “~” is on. “Net” will be displayed to indicate that the

balance is tared

• When the display shows zero, place the item to be weighed. Only the

net weight will be displayed. The capacity tracker at the bottom of the

LCD will indicate the weight graphically with respect to the maximum

weighing capacity

• At any time the [Unit] key can be pressed to select another unit. Use

the [Up] or [Down] key to scroll through the units and select the desired

unit by pressing the [Enter] key, the display will change to show the

weight in the selected weighing unit. The available weighing units can

be enabled or disabled by the user (see section 13.1). Only weighing

units that have been enabled will be cycled through when the [Unit] key

is pressed

9.3.1 Weighing Units

You can select alternative weighing units to display the weight by pressing

the [Unit] key. The common weighing units are:

Unit Symbol Models Conversion Factor

1g =

Conversion Factor

1 unit = grams

1 GRAMS g All 1 1.0

2 MILLIGRAMS mg All 1000 0.001

3 CARATS ct All 5 0.2000

4 PENNYWEIGHTS dwt All 0.643014865 1.555174

5 GRAINS GN All 15.43236 0.0647989

6 TROY OUNCES ozt All 0.032150747 31.103476

7 OUNCES oz All 0.035273962 28.349523

8 POUNDS lb All 0.0022046 453.5924

9 DRAMS dr All 0.564383422 1.7718451

10 HK TAELS tl H All 0.026717251 37.42900

11 TAIWAN TAELS tl T All 0.026666702 37.49995

12 SING TAELS tl S All 0.026455464 37.799375

13 MOMMES mm All 0.266666951 3.749996