Manual

1) Use the [Up] and [Down] keys to  increase or decrease the value for setting.

Press[Enter]toacceptthesettingandadvancetothenextiteminthemenu

2) Press[Mode]toadvancetosettingofthenextparameteror[Esc]toreturnto

normalweighing

12.5 CALIBRATIONSETUP

Thismenuallowstheusertosetthecalibrationparameters.

Press[Enter]when “CAL SETUP”isdisplayedtoselectthecalibrationparameters

The options for each parameter can be scrolled through by using the [Up] or

[Down]key

ENABLE

NO=operatorcalibrationisdisabled

YES=operatorcalibrationisenabled

CALREPORT

On=Enabled.PrintsoutCalibrationreportafter

successfulcalibration

OFF=Disabled

TIMECAL

On=Enabled.Selecttimefrom1to24hours.

OFF=Disabled

Press [Mode] to advance to setting of the next menu which is “PASSCODES” or

[Esc]toreturntonormalweighing.