Manual
Thenextlineshows:“LINENO2”“TIME”‐printstime
Onlyoneitemcanbeenteredperline.
Continue until the formatting of the form is complete. There are 15 lines of
possible data. After the 15th line has been set or “END” has been selected, the
balancewillreturntotheRS‐232Sub‐menu.
Press[Mode]toadvancetosettingofthenextmenuorpress[Esc]toreturnto
normalweighing.
12.4 SETUPPARAMETERS
TheuserparametersthatcontrolthebalanceareshownundertheSETUP.When
“SETUP” is displayed, press the [Setup/Enter] key. The options for each
parametercanbescrolledthroughbyusingthe[Up]or[Down] key.
TIME SetTimeusingthenumericentrymethod(see
section5.1)
DATEDATEFORM
EUROPE(dd/mm/yy)
USA(mm/dd/yy)
ASIA(yy/mm/dd)
SetDateusingthenumericentrymethod(see
section5.1)
USERID Enterausernumbertoidentifytheuserorthe
balance
BUZZER On=EnableOFF=Disable
BACKLIGHT OnOFFAUTO
POWERDOWN
SetthetimeafterwhichtheunitwillgointoStand‐
bypowersettings,On=Enable,OFF=Disable,Ifset
toOn‐theoptionsare1to9minutes
FILTER
Setavaluefortheamountoffilteringtobedone,
settonormal,sloworfast.
STABILITY
Setavaluetobeusedtodeterminebalance
stability,setavalueof1,2,5or10d.Alarger
numbercorrespondstoalargerstablezone.
AUTOZERO CanbesettoOnorOFFtoenabletheauto‐zero
function.IfsettoOn‐selectfrom1,2or5d
Thesub‐menuisenteredbypressing[Enter]–
33 | Page © Adam Equipment Company 2008