Manual

9.2 STANDARDFORMAT9.2 STANDARDFORMAT

The balance will print the following data as the standard form. The standard form

cannotbechanged.Theformatofthecustomforms#1and#2willbethesameas

thestandardformuntilmodifiedbytheuser.

The balance will print the following data as the standard form. The standard form

cannotbechanged.Theformatofthecustomforms#1and#2willbethesameas

thestandardformuntilmodifiedbytheuser.



Line1Line1 DateDate

Line2 Time

Line3 Blankline

Line4 IDnumber

Line5 Blankline

Line6 Result

Line7 Blankline

Line8 Blankline

Thiswillresultinaprintoutthatlookslike:

Date:23/09/04

Time:15:45



IDNo:123456

NOTE:

The format of the results line will change depending on the mode in which the

balanceisoperating,e.g.

  Normalweighing,Checkweighing:“123.456g”

 Partscounting:“1234pcs”

 Percentweighing:“12.345%”

9.3 INPUTCOMMANDSUSINGREMOTE KEYS

Thebalancecanbecontrolledwiththefollowingcommandssentusingremotekeys

such as from a PC. The commands must be sent in upper case letters, i.e. “KT” not

“kt”. Press the Enter key of the PC after each command (the action of Carriage

Returnisdenotedas<CR>asshownbelow).