Manual

9) The balance will request the weight of the sample in air by displaying “AIR

WEIGHT”. Place the item on the pan or receptacle, if the density kit  is used.

Press[Enter]todeterminethevalue

10) Aftercompletionof the air weighing, the balance will request the weight in

liquid by displaying “LIQUID WT”. Submerge the item in the liquid and press

[Enter]tostarttheliquidweighing.Thebalancewillcomputethedensityof

thesampleanddisplayitas“DENSITY XXXX g/cc”

11) Aftercompletionoftheliquidweighing,removetheitemfromthepan

12) Press [Mode] to continue with a new sampleor press[Esc] to return to

normalweighing

DENSITYOFLIQUID

When finding the density of a liquid, it is necessary to weigh a sample of known

volumeinairandthenintheliquid.Thevolume ofthe samplemustbeenteredby

theuser.Thelastknownvolumeisstoredforuseatanytime.

If using the density determination kit, the volume of the plumb is marked on its

support,i.e.10.123

Steps:

1) Press[Mode]andthen[Up]and[Down]toselectDensitymode.

2) Press[Enter]toselecttheDensitymode

3) Use[Up]and[Down]toscrollthroughthesolidorliquidmethod

4) When“DENSITY LIqUId”isdisplayed,press[Enter]toentertheliquidsmethod

5) The volume will be asked for. Enter the volume using the numeric entry

method(seesection5.1)orcontinueusingthelastvolumeentered

6) Press[Enter]tocontinue