Manual

weighingunit.Ifthe weighingunitispounds: ounces the limit issetindecimal

pounds,1.500lb=1lb8oz.

4) Press[Enter]toproceed

5) If the “LOW LIMIT” was set to “OFF” or the setting of the low limit is complete,

then the display will change to “HIGH LIMIT”. Use [Up] and [Down] to set the

“HIGH LIMIT” to “On”or“OFF”

6) Press[Enter]toproceed

7) If the “HIGH LIMIT” was set to “On”, the display will show the current high limit

whichcanbechangedbyusingthenumericentrymethod(seesection5.1)

8) Press[Enter]toproceed

9) Nextthebeepersettingisdisplayed.Press[Up] or[Down]toscrollthroughthe

options–

10) “BUZZER OFF” (Beepersettooffatalltimes)

11) “BUZZER In” (Beeperwillsound whentheweighton thepan iswithinthelimit)

or

12) “BUZZER Out” (Beeper will sound when the weight on the pan is outside the set

limits)

13) Confirmthebeepersettingbypressing[Enter]

14) Press[Enter]againtostarttheCheckWeighing

15) When a weight is placed on the pan now, the display will indicate whether the

weight is below the LOW LIMIT between the LOW and HIGH LIMITS or higher

thantheHIGHLIMITusingthecapacitytracker,

16) Toperformcheckweighing with another sample press [Mode] and continue as

before

17) Toreturntonormalweighing,press[Mode]thenpress[Esc].