Owner manual

35
Liquifram™ Stroke Setting Chart
Pump Series Stroke Knob Setting
All AA, B, J, P Series
C10, C11, C12, C70, C71, C72, C76, 90%
C90, C91, C92, E70, E71, E72
C78 50%
C13, C14, C73, C74, C77,
C93, C94, E73, E74 70%
* Liquifram
™
on M Series pumps only, must be bottomed completely (turned
all the way in).
Do Not Use Straight Edge .
6. Grasp the outer edge of the Liquifram
™
and adjust by screwing
it in or out so that the center of the Liquifram
™
is ush with
the outside of the spacer edge (see illustration below).
7. Once the Liquifram
™
is properly positioned, remount the
pump head to the spacer using the four (4) screws. Tighten
in a criss-cross pattern. After one week of operation, recheck
the screws and tighten if necessary.