Manual

4.0 BASICOPERATION
4.1 TURNINGONTHE BALANCE
Plugin theunitusing theACadapter or use the internalrechargeable battery. Itis
recommendedthatyouchargethebatteryforatleast8hoursbeforefirstuse.
1) Toturnonpressthe[on/off]keyonceandrelease.Thebalancewillshowthe
software revisionand thecapacitythen selftest before showingzeroon the
displayandthestablesign.
2) Thebalanceisreadytobeused.
3) Toturnthebalanceoffafterusepressthe[on/off]keyagain.Thereisanauto
poweroff function that will automatically turn the unit off if not used for a
periodoftime,thiscanbesetintheparameterssection.
If an error is shown while turning on the balance check the internal calibration
weighthasnotbeenleftinthecalibrateposition.Movetheleverallthewaytothe
left.Turnoffthebalanceandturnitbackonagain.
4.2 ZEROING
/TA RE
You can press the [Tare] key to set a new zero point and show the zero reading if
the weight reading is less than 4% of the total of the maximum capacity of the
balance. This may be necessary if the weight reading is not reading zero with
nothingonthepan. Thezero indicator willshow upin theupperleftcorner ofthe
LCD.
If you are using a container to weigh then you can place this on the platform and
press the [Tare] key. Providing the container weight is more than 4% of the
maximumcapacityofthebalance,thedigitswillshowzeroandNETwilllightupon
the display. You can then weigh your sample in the container. Taring weight
subtractsfromthetotalbalancecapacity. 
Note:Whenthecontainerisremovedanegativevaluewillbeshown
equivalent to the total value of the amount tared. The balance will
nottareavalueforacontainerunlessthestabilitylightindicatesthat
theweightisstablethusensuringacorrecttaringfunction.
9|Page©AdamEquipmentCompany2008