Manual

2.0 INTRODUCTION



ThankyouforpurchasingyournewHighland

 portable balance,EveryHighland



balance has all the features you really need: AC adapter and internal rechargeable

battery, HandiCal

 calibration, backlit display, and ShockProtect

 with overload

indicator. With RS‐232 and USB interface for communication with printers  and

computers, splash‐proof keypad, and sturdy plastic construction, the Highland



serieswillbeabalanceyoucanrelyupon.Wehopethatyouenjoyusingyournew

balance.

3.0 SETUP

3.1 UNPACKINGANDSETTINGUPYOURBALANCE



1) Removethebalance,draftshield,toppan,ACadapterandpansupportfrom

thepackaging

2) Remove all the transit protection packaging from the calibration lever

(protectstheinternalcalibrationassemblyduringtransit)

3) Remove the shipping protection screw and transit disc from the top of the

balance and place the plastic top pan support on the balance. Do not use

excessiveforcewhenremovingandinstallingthescrew.

4) PuttheStainlesssteelpanontopofthepansupport

5) Placethedraftshieldontopofthebalance,thelocationnotchesinthebreeze

shield should align with the cut outs on the balance. For optimu m

performancethebalanceshouldbeusedwiththedraftshield(ifprovided).



USBinterfaceonside