Manual

wheneverastablereadingispresent.

Thebalancehastoreturntozero

beforeanotherreadingissentviathe

interface.



Pressthe[Mode]keytochangethesetting.Press[Tare]toconfirmandmove 

tothenextparamet er.

7) Settingthebaudrate.Thisisthetransmissionspeedforcommunicationwith

printers and computers. The selected rate must match that of the other

deviceforcommunicationstowork.

Thefollowingsettingsareavailable:

b 600

b 1200

b 2400

b 4800

b 9600



Pressthe[Mode]keytochangethesetting.Press[Tare]toconfirmandmove 

tothenextparamet er.

8) Paritysettings.Parityisacommunicationscheck.Thereare3settingsthatthe

Highlandcanworkwithasfollows:

8 n 1

8 data bits, no parity

7 E 1

7 data bits, even parity

7 0 1

7 data bits, odd parity

Pressthe[Mode]keytochangethesetting.Press[Tare]toconfirmandmove 

tothenextparamet er.

9) The display will go back showing F3 SEr. Press the [Print] key to return to

weighingorpress[Mode]to gotothenextfunction.