User guide

56
Power up modes
Power up modes are special ways to clear memory or defaults during
power up.
To activate a power up mode:
1. Turn off the power using the power switch on the back of the
instrument ( ).
2. Turn power back on ( ) and before the instrument completes the
display check,
2a. (before the small 12 turns off).
Push and hold:
CLEAR & MENU to clear a service calibration and revert
to factory calibration, or
21
10-28 VDC
7-20 VAC
500 MA
12 CHANNEL TERMOCOUPLE SCANNER
PARALLEL PRINTER
TRIGGER
+ GND
OUT/LINK
RS-
232
MODEL ####-##
Mfg. By Barnant Company
Barrington, IL 60010-2392
USA
1
7
2
8
3
9
4
10
5
11
6
12
PC/IN
11
12
°F
°C
°R
K
NUM HOLD MAX PRINT AVG LOG STORE RECALL CAL MIN ALARM LO HI
2a
BA 50-59 10/12/01, 11:07 AM56