User guide

2929
Front panel displays and controls continued
How to change the resolution
+-
ALARM
EXIT
MENU
1
STORE
2
LOG
3
RECALL
4
PRINT
5
MAX
6
MIN
7
AVG
8
HOLD
9
SCAN
2 1, 3b
3a
1a
1b
0
CLEAR
How to change the resolution
The instrument can display and print temperatures at either 0.1° or 1°
resolution.
The default resolution is 0.1°.
To set or change the resolution:
1. Push MENU until RESOLUTION is displayed.
RESOLUTION 1a is displayed and the current resolution setting
1b flashes.
2. Push the Up or Down arrow keys until the desired resolution is
flashing.
3a. Push EXIT to save the setup and return to scanning, or
3b. Push MENU to switch to the next setup topic (Enable/Disable
channels).
BA 26-31 10/12/01, 11:04 AM29