User guide

14
Front panel displays and controls continued
2 LOG button
2 LOG button
Push to log record cycles as they are read. (Same as STORE, only
continues automatically.)
When a numerical entry is required and the NUM icon is on, push to
enter a ‘2’.
Push again to turn logging off.
The word “LOG” a appears and remains in the display while records are
being logged.
“STORE” appears, and remains, in the display when one or more records
are in storage.
Use to save a particular set of data records.
• Readings from all 12 channels are logged.
• How often records are logged is set using the MENU - LOG
procedure, page 37, which may be different from the scan rate.
• The time and date of the reading is logged.
• Up to 4,680 records may be logged. Memory is shared with the
STORE function. When no more data can be stored the display
reads “LOG FULL”.
• To clear (erase) stored records, push CLEAR, then push LOG.
“STORE” will disappear from the display.
+-
ALARM
EXIT
MENU
1
STORE
2
LOG
3
RECALL
4
PRINT
5
MAX
6
MIN
7
AVG
8
HOLD
9
SCAN
°F
0
CLEAR
.
4
°F
LOG
a
2
LOG
2
BA 13-25 10/12/01, 11:03 AM14