User Manual

5.0 FUNCTIONS

5.1 AUTOPOWEROFF

Theauto poweroffhelpsconservepowerwhenusingonbatteryortheACadapter,

the machine willautomatically turn off after4 min of inactive use orno change in

thedisplayedweight.

6.0 CALIBRATION

BeforecalibratingtheDuneseriesitisbesttoturnontheunitforabout1mintolet

thecomponentswarmup.

1) Press[on/off]keytoturnthepoweron,ifitisnotalready.

2) Pressandholdthe[Unit]key,until“CAL”isdisplayed

3) Removeanyweightfromthepan.

4) Pressthe[Unit] key,thedisplay willflash“CAL”themwill showthecalmass

required.Ifthecalmassis notdisplayedthenthe machine  isnotstableoris

not within a zero range. Turn off the unit and try zeroing the display before

tryinganothercalibration.

5) Placetheappropr iat ecalibrationmassonthescale:

Model CalibrationMass

DCT201 200g

DCT2000 2000g

DCT5000 5000g

6) After the stable reading the display will show “PASS” then revert to the

weighing mode. If the calibration does not pass the display will show “FAIL”

andshutoff.

7) The calibration is now finished. If the calibration is correct, the display will

showtheweightvalue.

NOTE:Ifthecalibrationfailsretry,ifitstillfailsthentheremaybedamagetothe

mechanics oran issue withthe power. Ifyou do not follow theprocedures ina

timelymannerthe machinewillautomaticallyswitch off andthecalibrationwill 

notbeaccepted.