User Manual

4.0 BASICOPERATION

4.1 TURINGONTHESC ALE

Plugintheunitusing theACadapterorusebatteries.Donotusebatterypowerand

theACadapteratthesametime.

1) To turn on press the [on/off]key once and release. All of the segments on

thedisplaywilllightup,thenthedisplayshowszero>0< 

2) Thescaleisreadytobeuse.

3) To turnthe scale offafter use pressthe [on/off] key again. Thereis anauto

power‐off function that will automatically turn the unit off after 4 min of

inactivityornochangeintheweightreading.

4.2 ZEROING

/TARE

You canpress the [Tare]key to set a new zero point  and show the zero readingif

theweightreadingislessthan4%ofthetotalofthemaximumcapacityofthescale.

This may be necessary if the weight is not reading zero with nothing on the

platform.Thezeroindicatorswilllightup:>0<.

If you are using a container to weigh then you can place this on the platform and

press the [Tare] key, providing the container weight  is more than 4% of the

maximum capacity of the scale, the display will show zero and tare indicator will

light up. You can then weigh your object in the container. Taring weight subtra cts

fromthetotalscalecapacity.



Note: When the container is removed a negative value will be shown. If the scale

was tared justbefore removingthe container, this value isthe gross weightof the

containerplusallproductswhichwereremoved.

4.4 WEIGHING

To determine the weight of a sample, first tare an empty container (if used), then 

placethesampleinthecontainer.Thedisplaywillshowtheweightandtheunitof 

weightcurrentlyinuse.