Instruction Manual

3.0 SETUP

3.1 UNPACKINGAN DSETTINGUPYO URBALANCE

1) Removetheshippingprotectionscrewandroundcoverasshownbelowusing

the Allen key supplied in the box. (It is advisable to keep the shipping

protection screw and the round cover along with the packing box for using

duringshippingtoanotherlocationinfuture).



Shippingprotectionscrew

Roundcoveraroundthescrew



2) Placethepan(whichcomesseparatelypacked)inthereceptaclesonthetop

cover.

Usethe shippingprotection

screw that you removed to

screw the plastic pan into

place. Be careful when

putting the screw in that

you do not use too much

forceasitcandamagedthe

loadcell. You should just be

able to use light force to

securethescrew.

3) Placethestainlesssteelpanontopoftheplasticpan.

4) Placethebalanceonafirmandflatsurfaceforaccurateweighing.