Instruction Manual

5.2 SETTINGTHEBACKLIGHT

The backlight may be enabled or disabled by the user. If the backlight is disabled,

thebatterylifewillbegreater.

Thefollowingsettingsareavailable:



1 BL

Setsthebacklighttooperateautomaticallywhenaweightis

placedonthebalanceorakeyispressed.

2 BL

Setsthebacklighttobeonallthetime.

OFF BL

Setsthebacklighttobeoff.



1) To setthis parameter turn thepoweroff press andhold the [Tare]key then

pressthe[on/off]keyonce,thenrelease the[Tare]key.

2) ThedisplaywillshowthefirstfunctionPWR

3) Pressthe[Unit]keyuntilthedisplayshowsXX BL whereXXisthelastsetting

4) Press[Tare]keytoselectthesettingsasfollows1 BL‐2 BL–OFF BL 

5) Pressthe[Unit]keytoconfirmthesetting

6) Toexitturnthebalanceoffandbackonagain

5.3 ENABLING

THEWEIGHIN GUNITS

Youcanenableanddisabletheweighingunitsavailabletotheuserwhentheypress

the[Unit]keyasdescribedinsection4.4WeighingUnits.

1) To setthis parameter turn thepoweroff press andhold the [Tare]key then

pressthe[on/off]keyonce,thenrelease the[Tare]key.

2) ThedisplaywillshowthefirstfunctionPWR

3) Press the [Unit] key until the display shows you XX g where XX is the last

settingonoroff.

4) Pressthe[Tare]keytoselectonoroFF.

5) Pressthe[Unit]keytomovetothenextweighingunit.

6) Repeatsteps5and6untilyouhavesetalloftheweighingunits.