User Manual
Table Of Contents
- _
- Foreword
- Introduction
- Section One: Simplex 4010 NION Hardware
- 1.1: General Description
- 1.2: Hardware Description
- Figure 1-1: NION-NPB Layout
- 1.3: SMX Network Connection
- Figure 1-2: SIMPLEX 4010 NION TB5 Power Connection
- 1.4: SMX Network Transceivers
- Figure 1-3: FTXC-PCA and FTXC-PCB Network Transceivers
- Figure 1-3a: FTXC-PCA Transceiver Wiring
- Figure 1-4: S7FTXC-PCA Style 7 Transceiver
- Figure 1-5: Sample Style-7 Networks
- Figure 1-6: FOXC-PCA and DFXC-PCA Fiber Optic Network Transceivers
- Section Two: Simplex 4010 NION Installation and Configuration
- 2.1: Simplex 4010 NION Connection
- Figure 2-1: Simplex 4010 NION Architecture
- Figure 2-2: Simplex 4010 NION to Simplex 4010-9811 Serial Connections
- 2.2: Simplex 4010 NION Enclosure and Mounting
- Figure 2-4: NISCAB-1 Enclosure Mounting Hole Layout
- 2.3 Event Reporting and Acknowledgement
- Figure 2-5: Installing the NION in a NISCAB-1
- Section Three: Simplex 4010 NION Explorer
- 3.1 Simplex Explorer Overview
- 3.2 Simplex 4010 Explorer Operation
- 3.2.1 Registering and Opening the Simplex Explorer
- 3.2.2 The Simplex 4010 Explorer Main Form
- 3.2.3 Configuring the NION through Simplex 4010 Explorer
- Figure 3-2: NION-Simplex 4010 Configuration Menu
- Figure 3-1: Simplex 4010 Explorer
- Figure 3-4: Duplicate Device Labels
- Figure 3-3: Learn Panel Devices Session
- Figure 3-5: Data Capture Mode
- Figure 3-6: NION Configuration Options
16
Simplex 4010 NION Installation/Operation Manual Version 2 Document 51998 Rev. A1 03/26/03
Simplex 4010-9811 DualSimplex 4010-9811 Dual
Simplex 4010-9811 DualSimplex 4010-9811 Dual
Simplex 4010-9811 Dual
EIA-232 CardEIA-232 Card
EIA-232 CardEIA-232 Card
EIA-232 Card
Simplex 4010 NIONSimplex 4010 NION
Simplex 4010 NIONSimplex 4010 NION
Simplex 4010 NION
TB1TB1
TB1TB1
TB1
Serial PSerial P
Serial PSerial P
Serial P
ort B (P6)ort B (P6)
ort B (P6)ort B (P6)
ort B (P6)
Figure 2-2: Simplex 4010 NION to Simplex 4010-9811 Serial Connections
Serial Connections
The Simplex 4010 NION requires that a Simplex model 4010-9811 dual EIA-232 card be installed in the Simplex
4010 FACP. The NION communicates to the 4010 FACP through serial port P6 onboard the 4010-9811 card.
Figure 2-2 diagrams the wiring between TB1 of the NION and P6 (Serial Port B) of the 4010-9811.
Serial Communication Settings
The EIA-232 settings of the NION are 9600 baud, 8 data bits, No parity and 1 stop bit. The Simplex 4010 fire
panel must match these settings in order for the NION to communicate with the panel properly.
NOTE: Use only wire for power limited
systems. Power limited wire runs use
type FPLR, FPLP, FPL or equivalent
cabling per NEC 760.
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com