User Manual
Table Of Contents
- _
- Foreword
- Introduction
- Section One: Simplex 4010 NION Hardware
- 1.1: General Description
- 1.2: Hardware Description
- Figure 1-1: NION-NPB Layout
- 1.3: SMX Network Connection
- Figure 1-2: SIMPLEX 4010 NION TB5 Power Connection
- 1.4: SMX Network Transceivers
- Figure 1-3: FTXC-PCA and FTXC-PCB Network Transceivers
- Figure 1-3a: FTXC-PCA Transceiver Wiring
- Figure 1-4: S7FTXC-PCA Style 7 Transceiver
- Figure 1-5: Sample Style-7 Networks
- Figure 1-6: FOXC-PCA and DFXC-PCA Fiber Optic Network Transceivers
- Section Two: Simplex 4010 NION Installation and Configuration
- 2.1: Simplex 4010 NION Connection
- Figure 2-1: Simplex 4010 NION Architecture
- Figure 2-2: Simplex 4010 NION to Simplex 4010-9811 Serial Connections
- 2.2: Simplex 4010 NION Enclosure and Mounting
- Figure 2-4: NISCAB-1 Enclosure Mounting Hole Layout
- 2.3 Event Reporting and Acknowledgement
- Figure 2-5: Installing the NION in a NISCAB-1
- Section Three: Simplex 4010 NION Explorer
- 3.1 Simplex Explorer Overview
- 3.2 Simplex 4010 Explorer Operation
- 3.2.1 Registering and Opening the Simplex Explorer
- 3.2.2 The Simplex 4010 Explorer Main Form
- 3.2.3 Configuring the NION through Simplex 4010 Explorer
- Figure 3-2: NION-Simplex 4010 Configuration Menu
- Figure 3-1: Simplex 4010 Explorer
- Figure 3-4: Duplicate Device Labels
- Figure 3-3: Learn Panel Devices Session
- Figure 3-5: Data Capture Mode
- Figure 3-6: NION Configuration Options
15
Simplex 4010 NION Installation/Operation Manual Version 2 Document 51998 Rev. A1 03/26/03
2.1: Simplex 4010 NION Connection
The Simplex 4010 NION provides monitoring of the Simplex 4010 FACP. This requires the use of a Simplex
4010-9811 dual EIA-232 card installed in the Simplex 4010 panel.
The 4010-9811 dual EIA-232 card provides the NION the communication connection to the Simplex 4010
panel via serial port B (P6) of the 4010-9811. See figure 2-2 for wiring connections.
Section Two: Simplex 4010 NION Installation and
Configuration
2
Figure 2-1: Simplex 4010 NION Architecture
Simplex 4010 FSimplex 4010 F
Simplex 4010 FSimplex 4010 F
Simplex 4010 F
AA
AA
A
CPCP
CPCP
CP
UniNet™ 2000 LocalUniNet™ 2000 Local
UniNet™ 2000 LocalUniNet™ 2000 Local
UniNet™ 2000 Local
Area ServerArea Server
Area ServerArea Server
Area Server
Simplex 4010 NIONSimplex 4010 NION
Simplex 4010 NIONSimplex 4010 NION
Simplex 4010 NION
NIONNION
NIONNION
NION
EchelonTEchelonT
EchelonTEchelonT
EchelonT
o Other Nodeso Other Nodes
o Other Nodeso Other Nodes
o Other Nodes
Ethernet TEthernet T
Ethernet TEthernet T
Ethernet T
o Other Wo Other W
o Other Wo Other W
o Other W
orkstations,orkstations,
orkstations,orkstations,
orkstations,
Servers, etc.Servers, etc.
Servers, etc.Servers, etc.
Servers, etc.
4-wire EIA-2324-wire EIA-232
4-wire EIA-2324-wire EIA-232
4-wire EIA-232
Connection to SimplexConnection to Simplex
Connection to SimplexConnection to Simplex
Connection to Simplex
4010-9811 Dual EIA-4010-9811 Dual EIA-
4010-9811 Dual EIA-4010-9811 Dual EIA-
4010-9811 Dual EIA-
232 Card P232 Card P
232 Card P232 Card P
232 Card P
ort Bort B
ort Bort B
ort B
SimplexSimplex
SimplexSimplex
Simplex
4010 NION4010 NION
4010 NION4010 NION
4010 NION
Simplex 4010 FSimplex 4010 F
Simplex 4010 FSimplex 4010 F
Simplex 4010 F
AA
AA
A
CPCP
CPCP
CP
NOTE: Use only wire for power limited systems.
Power limited wire runs use type FPLR, FPLP, FPL or
equivalent cabling per NEC 760.
Technical Manuals Online! - http://www.tech-man.com
firealarmresources.com