Instruction Manual

Page 2 of 2 — DN-6710:A • 10/17/06
NOTIFIER®, SpectrAlert®, and System Sensor® are registered trade-
marks of Honeywell International Inc.
©2006 by Honeywell International Inc. All rights reserved. Unauthorized use
of this document is strictly prohibited.
This document is not intended to be used for installation purposes.
We try to keep our product information up-to-date and accurate.
We cannot cover all specific applications or anticipate all requirements.
All specifications are subject to change without notice.
For more information, contact Notifier. Phone: [phone], FAX: [phone].
www.notifier.com
Made in the U.S. A.
6710sel.wmf
Voltage and Power Selection
Example shown: selecting a 1/4 watt input
when a 25.0 volt (nominal) amplifier is being
used.
Ordering Information
White Red Description Speaker Voltage
SpectrAlert Dual-Voltage Evacuation Speakers
SP200W — Round, standard SPL, 1/4 – 2 watt power tap. 25.0/70.7 V
RMS
SP201W SP201R Square, standard SPL, 1/4 – 2 watt power tap. 25.0/70.7 VRMS
SP300W — Round, high SPL, 1/4 – 2 watt power tap. 25.0/70.7 VRMS
SP301W SP301R Square, high SPL, 1/4 – 2 watt power tap. 25.0/70.7 VRMS
Accessories
BBSCW — Surface-mount backbox skirt for SP200W, SP300W. NA
BBS-
SP201W
BBS-SP201R Surface-mount backbox skirt for SP201W, SP301W. NA
Mounting Diagrams
4.0" x 4.0" x 2.125"
(10.16 x 10.16 x 5.398 cm)
backbox
4.0" x 4.0" x 2.125"
(10.16 x 10.16 x 5.398 cm)
backbox
Speaker Series
SP201/SP301
Speaker Series
SP200/SP300
6710mt06.tif
firealarmresources.com