Owner's Manual

ManualsBrandsNOTIFIER ManualsAddressable FACPNOTIFIER Spartan-25 NSP-25C Addressable FACP With Built-in Communicator

DN-60640:A2 • 12/03/2010 — Page 1 of 4

Spartan-25® (NSP-25C)

Addressable FACP

With Built-in Communicator

Addressable Fire Alarm Control Panels

Canadian DN-60640:A2

spartan_sm.JPG

General

The NOTIFIER Spartan-25 (NSP-25C) is a 25 point address-

able Fire Alarm Control Panel (FACP) with built-in Digital

Alarm Communicator Transmitter (DACT). This control panel

supports up to 25 addressable devices in any combination of

detectors and modules and then reports these devices into

one of 5 available zones.

With simple programming, operation on standard wire, and

features such as drift compensation and maintenance alert,

the Spartan-25 is a preferred alternative to conventional con-

trol panels in both new and retrofit applications.

The JumpStart® (or auto-learn) feature and easy-to-set code-

wheel addressing of Honeywell Fire Systems detectors and

modules enable the system to be quickly configured for fire

protection without a programming utility. The default program-

ming can be easily modified on a PC using the panel’s embed-

ded web server.

The integral DACT transmits system status (alarms, troubles,

supervisories, etc.) for up to 5 zones to a remote monitoring

location via the public switched telephone network. Reporting

formats are contact ID, SIA 8 or SIA 20.

Features

• ULC listed and ETL certified to ULC Standard S527 and

S559

• JumpStart® auto-learn feature reduces installation time

and makes programming easy.

• Built-in digital communicator.

• Two programmable Style Y (Class B) notification appliance

circuits (NACs).

• Selectable strobe synchronization for System Sensor®,

Gentex®, Wheelock® or AMSECO devices.

• Two programmable Form-C relays and one Form-C trouble

relay.

• Drift compensation.

• Alarm verification per zone of detectors.

• Walk-test.

• Honeywell Fire Systems detectors and modules are code-

wheel addressed for faster installation time.

• Maintenance alert region.

• Uses standard wire (unshielded or twisted pair).

• Central Station reporting up to five zones.

• On Board Annunciator.

• Custom programming performed through the control

panel’s built-in browser; no programming software is

required.

DCL Communication

• Single addressable DCL loop which meets ULC DCLB

requirements.

• 25 addressable device capacity (any combination of

addressable detectors and modules).

• Compatible with Honeywell Fire Systems detectors and

modules.

Notification Appliance Circuits (NACS)

• Two independently programmable output circuits. Circuits

can be configured for the following outputs:

– Style Y (Class B).

– Door Holder Service (cannot be used for notification

appliances).

– Aux Power Source (cannot be used for notification appli-

ances).

• Silence Inhibit and Auto-silence timer options.

• Continuous or Temporal code.

• Selectable strobe synchronization per NAC.

• Up to 2.0 A total output power, 1.0 A for auxiliary power and

door holder. Each circuit can source up to the total system

current 2.0 A.

Programming and Software

• Auto-learn “JumpStart®” feature for easy programming

reduces installation time.

• Custom programming can be performed through control

panel’s built-in browser. (Requires PC with MS Internet

Explorer or Mozilla Firefox and standard Cat5e Ethernet

cable)

• 5 programmable zones (combination of alarm / supervisory)

firealarmresources.com

Summary of content (4 pages)

PAGE 1
Canadian DN-60640:A2 Spartan-25® (NSP-25C) Addressable FACP With Built-in Communicator Addressable Fire Alarm Control Panels General The NOTIFIER Spartan-25 (NSP-25C) is a 25 point addressable Fire Alarm Control Panel (FACP) with built-in Digital Alarm Communicator Transmitter (DACT). This control panel supports up to 25 addressable devices in any combination of detectors and modules and then reports these devices into one of 5 available zones.
PAGE 2
User Interface KEYPAD CONTROLS The panel has a 3-character, 7-segment display for Point ID status.
PAGE 3
Product Line Information NSP-25C: 25 point addressable fire alarm control panel. Includes main circuit board, chassis, backbox and door. Black; 120 VAC. Listed for Canadian applications. Note: For versions used outside Canada, see DN-60609. HONEYWELL FIRE SYSTEMS DEVICES HFS-PA: Honeywell Fire Systems addressable photoelectric smoke detector. Includes base. HFS-PTA: Honeywell Fire Systems addressable photoelectric smoke detector with thermal sensor. Includes base.
PAGE 4
SYSTEM SPECIFICATIONS System Capacity Temperature and Humidity Ranges • Intelligent DCL Circuits ....................................................... 1 • Addressable device capacity ............................................ 25 • Programmable software zones ........................................... 5 This system meets NFPA requirements for operation at 0 – 49°C and at a relative humidity 93% ± 2% RH (noncondensing) at 32°C ± 2°C.