Instruction Manual

Page 2 of 6 — dn-6913:a • 12/18/07
Typic al Plug-In Tools and Workstat ion
Applets
NION-2C8M/16C48M
• Inputs can be configured for automatic enable and disable
using user-defined schedules.
• Outputs can be configured for activate and deactivate.
• Input/Output Configuration, Time Codes and Holiday Codes
can be set on the same tabbed form.
• Configuration settings are downloaded and stored in the
NIONs.
• Inputs have the following definable parameters: Device Type,
Event Code, Delay, Time Code.
• Inputs can be controlled with these commands: Arm, Disarm,
Override, Disable.
CCTV AND CAMERA CONTROL
• Live video window.
• Switcher and PTZ interfaces available for several models by
Javelin®, Burle, Pelco and Vicon.
• On-screen pan, tilt, and zoom control.
• Switch cameras to external monitors.
• Use cameras to take member and operator snapshots.
• Auto-pan feature.
• Set up monitor sequencing or video tours.
• Assign camera presets and macros.
• On-screen focus and iris control.
NOTE: Refer to specific switcher interfaces for complete feature
lists.
Uninet2000.jpg
UniNet 2000 Workstation Software
Floor Plan
Display
Network
Communications
Control Section
Screen Title Site ID
Screen
Number
Time & Date Zoom Level
Event Counters
(configurable)
Expand Button
Unacknowledged
Event List
Acknowledged
Event List
2c8mIOConfig.jpg
cctvmock2.jpg
firealarmresources.com