Instruction Manual

ManualsBrandsNOTIFIER ManualsAddressable FACPNOTIFIER NSP-25 E Rec 2 Spartan-25 Addressable FACP with Built In Communicator

DN-60703:A1 • 9/19/2011 — Page 1 of 4

NSP-25(E) Rev 2

Spartan-25® Addressable FACP

With Built-in Communicator

Intelligent Fire Alarm Control Panels

DN-60703:A1

spartan_sm.JPG

General

The NOTIFIER Spartan-25 (NSP-25/NSP-25E) is a 25 point

addressable Fire Alarm Control Panel (FACP) with built-in Dig-

ital Alarm Communicator Transmitter (DACT). This control

panel supports up to 25 addressable devices in any combina-

tion of detectors and modules. With simple programming,

operation on standard wire, and features such as drift compen-

sation and maintenance alert, the Spartan-25 is a preferred

alternative to conventional control panels in both new and ret-

rofit applications.

The JumpStart® (or auto-learn) feature and easy-to-set code-

wheel addressing of Honeywell Fire Systems (HFS) or equiva-

lent Notifier detectors and modules enable the system to be

configured for fire protection without a programming utility. The

default programming can be modified using the panels embed-

ded web server.

The integral DACT transmits system status (alarms, troubles,

supervisories, etc.) to a remote monitoring location via the

public switched telephone network. Reporting formats are con-

tact ID, SIA 8 or SIA 20.

NOTE: Unless otherwise specified, the term Spartan-25 is

used in this data sheet to refer to the Spartan-25 and the Spar-

tan-25E. For details on the Canadian version, see DN-60705.

Features

• SBUS supports two ANN-80 Remote Annunciators

• JumpStart® auto-learn feature reduces installation time

and makes programming easy.

• Built-in digital communicator.

• IP communicator compatible

• Two programmable Style Y (Class B) notification appliance

circuits (NACs).

• Selectable strobe synchronization for System Sensor®,

Gentex®, Wheelock® or AMSECO devices.

• Two programmable Form-C relays and one Form-C trouble

relay.

• Automatic detector sensitivity testing (NFPA 72 compliant).

• Point status eliminates calibrated smoke test requirements

for NFPA 72.

• Drift compensation.

• Alarm verification per zone of detectors.

• Walk-test.

• Detectors and modules are code-wheel addressed for

faster installation time.

• Maintenance alert region.

• Uses standard wire (unshielded or twisted pair).

• Central Station reporting up to five zones.

• Custom programming performed through the control

panel’s built-in browser; no programming software is

required.

SLC Communication

• Single addressable SLC loop which meets NFPA Style 4

(Class B) requirements.

• 25 addressable device capacity (any combination of

addressable detectors and modules).

• Compatible with Honeywell Fire Systems (HFS) or equiva-

lent Notifier detectors and modules.

Notification Appliance Circuits (NACS)

• Two independently programmable output circuits. Circuits

can be configured for the following outputs:

– Style Y (Class B).

– Door Holder Service (cannot be used for notification

appliances).

– Aux Power Source (cannot be used for notification appli-

ances).

• Silence Inhibit and Auto-silence timer options.

• Continuous or Temporal code.

• Selectable strobe synchronization per NAC.

• Up to 2.0 A total output power, 1.0 A for auxiliary power and

door holder. Each circuit can source up to the total system

current 2.0 A.

Programming and Software

• Auto-learn JumpStart® feature for easy programming

reduces installation time.

• Custom programming can be performed through control

panel’s built-in browser.

firealarmresources.com

Summary of content (4 pages)

PAGE 1
DN-60703:A1 NSP-25(E) Rev 2 Spartan-25® Addressable FACP With Built-in Communicator Intelligent Fire Alarm Control Panels General The NOTIFIER Spartan-25 (NSP-25/NSP-25E) is a 25 point addressable Fire Alarm Control Panel (FACP) with built-in Digital Alarm Communicator Transmitter (DACT). This control panel supports up to 25 addressable devices in any combination of detectors and modules.
PAGE 2
• Disable per zone • Disable per NAC • JumpStart User Interface LED INDICATORS • • • • • • • • • AC Power (green) Fire Alarm (red) Supervisory (yellow) Alarm Silenced (yellow) System Trouble (yellow) Disabled (yellow) Low Battery Fault (yellow) Ground Fault (yellow) Walk Test (yellow) Product Line Information NSP-25: 25 point addressable fire alarm control panel. Includes main circuit board, chassis, backbox and door. Black; 120 VAC. NSP-25E: Same as NSP-25, but operates from 220/240 VAC.
PAGE 3
HFS-T: Honeywell Fire Systems addressable fixed temperature heat detector. Includes base. cables, enclosure must be mounted within 6” (15.24 cm) of the FACP. Red. HFS-MM: Honeywell Fire Systems addressable Mini-Monitor module for normally-open contact devices. Wiring Requirements HFS-MR: Honeywell Fire Systems addressable relay module. HFS-D: Honeywell Fire Systems addressable photoelectric duct smoke detector. Includes detector.
PAGE 4
SYSTEM SPECIFICATIONS System Capacity Temperature and Humidity Ranges • • • • This system meets NFPA requirements for operation at 0 – 49°C/32 – 120°F and at a relative humidity 93% ± 2% RH (noncondensing) at 32°C ± 2°C (90°F ± 3°F). However, the useful life of the system's standby batteries and the electronic components may be adversely affected by extreme temperature ranges and humidity.