Owner's Manual

Propel Item: T28600-26
Revision: 7.A
ProtocolNumber: FS-8700-26
Notifier AFP-200-300-400
Description
The Notifier AFP200/300/400 driver allows the FieldServer to transfer data to and from the Notifier AFP200, AFP300 and AFP400
Automatic Fire Alarm Panels over RS-232 using Notifier AFP200/300/400 protocol. The panel MUST output messages in
English. The FieldServer functions as a Client with this driver.
Formal Driver Type
Serial, Client only
Compatibility
FieldServer Model Compatible FieldServer Model Compatible
ProtoCessor No QuickServer FS-QS-10xx No
ProtoCarrier No QuickServer FS-QS-12xx Yes
ProtoNode No QuickServer FS-QS-20xx Yes
ProtoAir No QuickServer FS-QS-22xx Yes
FS-B35 Series No
Connection Information
Connection Type: RS-232
Baud Rates: 2400 (Vendor Limitation)
Data Bits: 7 [AFP200], 8 [AFP300/AFP400]
Stop Bits: 1 (Vendor Limitation)
Parity: Even [AFP200]; None [AFP300/AFP400] - (Vendor Limitation)
Hardware Interface: Notifier APF200, AFP300 or AFP400 Fire Panel
Multidrop Capability: No
Devices Tested
Device Tested (Factory, Site)
AFP200 Fire Alarm Panel Site
AFP300 Fire Alarm Panel Site
MSA is a registered trademark of MSA Technology, LLC in the US, Europe
and other Countries. For all other trademarks visit
https://us.msasafety.com/Trademarks.