User guide

Page 2 of 2 — dn-1271:A1 • 12/23/08

NOTIFIER® is a registered trademark of Honeywell International Inc.

of this document is strictly prohibited.

This document is not intended to be used for installation purposes.

We try to keep our product information up-to-date and accurate.

We cannot cover all specific applications or anticipate all requirements.

All specifications are subject to change without notice.

For more information, contact Notifier. Phone: (203) 484-7161, FAX: (203) 484-7118.

www.notifier.com

Made in the U.S. A.

NOTE 1: For interior mounting in any atmosphere that is compatible with terminal-screw-type connections. UL rating 50' x 50' (15.24 x

15.24 meters).

NOTE 2: Hermetically sealed for moisture-proof or dust-proof installations. Requires no special backbox when the all-weather leads are

properly spliced to “THW” or equivalent type wire.

NOTE 3: Hermetically sealed for moisture-proof or dust-proof installations. Requires no special backbox. Has plastic hexagonal wrench

grip bushing with 1/2” (1.27 cm) conduit threads for attachment to threaded hub cover, or any outlet box.

NOTE 4: Explosion-proof for installation in hazardous locations. Has hexagonal wrench-grip bushing with 1/2” (1.27 cm) conduit threads

for attachment to threaded hub cover of Series JL fixture fitting as manufactured by Killark Electric Co., or equal.

Thermotech Model 302 Series Rate-Anticipation Heat Detectors

Model Number Description Refer To

302-135 135°F Interior Vertical Mounting

Note 1 below

302-194 194°F Interior Vertical Mounting

302-AW-135 135°F All-Weather Vertical Mounting

Note 2 below

302-AW-194 194°F All-Weather Vertical Mounting

302-ET-135 135°F All-Weather Vertical Mounting

Note 3 below

302-ET-194 194°F All-Weather Vertical Mounting

302-EPM-135 135°F Explosion Proof Mounting

Note 4 below

302-EPM-194 194°F Explosion Proof Mounting

AP-P Decorative white plastic adaptor plate for mounting 302 and 302-AW to 4” outlet box.