User Manual
ManualsBrandsNot Assigned ManualsExternal Storage EnclosuresStarTech.com 4 Bay Thunderbolt 3 NVMe Enclosure, For M.2 NVMe Solid State Drives, 1x DisplayPort Video & 2x TB3 Downstream Ports, Up to 40Gbps, 72W Power Supply 4 Bay M.2 SSD External Hard Drive Enclosure - storage enclosure - M.2 NVMe Card / PCIe (NVMe)
5
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Requirements
For the latest requirements please visit
www.startech.com/M2E4BTB3.
• Host Computer with a Thunderbolt 3 Port
• M-Key Connector Type, 22 x 80 mm (2280), M.2 Drive x (Up
to) 4
• (Optional) Thunderbolt 3 Enabled Display Device x 1
• (Optional) Thunderbolt 3 Cable x 1
• (Optional) DisplayPort Enabled Display Device x 1
• (Optional) DisplayPort Cable x 1
• (Optional) Thunderbolt 3 Peripheral x 1
• (Optional) Thunderbolt 3 to DisplayPort Adapter Cable x 1
Installation
Connect the Drives
1. Turn the Enclosure upside down.
2. Remove the Drive Bay Cover on the bottom of the
Enclosure:
• Remove the two Drive Bay Screws using a Phillips Head
Screwdriver.
• Carefully ip the Enclosure to release the Drive Bay
Cover.
3. Remove the Holding Screw for the M.2 Drive using a
Phillips Head Screwdriver.
4. Slide the M.2 Drive into the M-Key Socket at a 45 degree
angle.