User Manual

Table Of Contents
2. Select More Sound Settings.
3. Select Digital Audio (HDMI).
4. Select Set Default, and then select OK.
Turning o HDMI audio
Use these instructions to return the audio stream to the computer speakers.
Depending on your computer's conguration, you will follow one of these procedures.
1. Right-click the Speakers icon in the notication area, at the far right of the taskbar, and then select
Playback devices.
2. On the Playback tab, select Speakers.
3. Select Set Default, and then select OK.
– or –
1. Right-click the Speakers icon in the notication area, at the far right of the taskbar, and then select Sound
Settings.
2. Select More Sound Settings.
3. Select Speakers.
4. Select Set Default, and then select OK.
Connecting a Thunderbolt DisplayPort device
To see video or high-resolution display output on an external Thunderbolt device, connect the Thunderbolt
device according to the instructions. The Thunderbolt™ DisplayPort connects an optional high-resolution
display device or a high-performance data device. This port delivers higher performance than the VGA port
and improves digital connectivity.
NOTE: Install all the latest drivers for your Thunderbolt device before connecting the device to the
Thunderbolt DisplayPort. Thunderbolt cable and Thunderbolt device (sold separately) must be compatible
with Windows. To determine whether your device is Thunderbolt Certied for Windows, go to
https://thunderbolttechnology.net/products.
1. Connect one end of the Thunderbolt DisplayPort cable to the Thunderbolt DisplayPort on the computer.
NOTE: Your connector might look slightly dierent from the illustration in this section.
36 Chapter 5 Entertainment features