User Manual

Table Of Contents
Media Type: Select the option for the type of paper for the print job.
Print Quality: Select the resolution level for the print job.
EconoMode: Select this option to conserve toner when printing drafts of documents.
5. Click the Print button.
Additional print tasks
Locate information on the Web for performing common printing tasks.
Go to www.hp.com/support/lj4001-4004plus.
Instructions are available for print tasks, such as the following:
Create and use printing shortcuts or presets
Select the paper size, or use a custom paper size
Select the page orientation
Create a booklet
Scale a document to t a specic paper size
Print the rst or last pages of the document on dierent paper
Print watermarks on a document
Store print jobs on the printer to print later or print privately
Store print jobs in the printer memory for printing at a later time.
Before beginning
Review the requirements for using the job storage feature.
The job storage feature has the following requirements:
A dedicated USB 2.0 storage device that is at least 16 GB in size must be installed in the rear host USB. This
USB storage device holds the job storage jobs sent to the printer. Removing this USB storage device from the
printer disables the job storage feature.
If you are using an HP Universal Print Driver (UPD), you must use UPD version 5.9.0 or above.
Set up job storage
Set up job storage in the print driver, insert the storage media (USB
ash drive) in the printer, and verify the
feature is ready to use.
Before you begin, install the printer software if it is not already installed. Go to www.hp.com/support, click
Software and Drivers, and then follow the onscreen instructions to download the latest HP software.
When the print driver is installed, the Job Storage option is set to Automatic by default. The option is located as
follows:
Windows: Devices and Printers > Printer Properties > Device Settings
40
Chapter 4Print