Use and Care Manual

ENGLISH
6
HOW TO OPERATE
Place the RETRO SERIES™ SNOW CONE MAKER on a stable, •
waterproof surface near an electrical outlet before starting.
Always make sure that the cord is away from any water source.•
Before plugging in the unit, add ice cubes to the Ice •
Shaving Canister by removing the Lid.
Do not overfill the Ice Shaving Canister. Make sure that •
there is enough room to put the Lid back on.
Plug in the unit. •
Turn Lid counter-clockwise to lock and turn on unit. •
The unit will immediately begin shaving the ice. •
Repeat the process until you have shaved the amount of ice desired.•
Turn Lid clockwise and unplug unit from outlet when finished.•
Scoop out shaved ice with Ice Scoop from inside •
Main Unit by opening the Door. Fill Plastic
Cones with desired amount of shaved ice.
Squirt flavored syrup onto ice in cones and serve.•
This unit comes with two Plastic Cones. It does not include syrup. It is •
recommended that you purchase a snow cone kit with syrup mix and
paper cones if you are planning to make a large batch of snow cones.
By following these simple instructions, your RETRO SERIES™ SNOW
CONE MAKER will be fun for friends, family and kids of all ages!
Unit is ON Unit is OFF