Use and Care Manual
ENGLISH
11
COOKING
MULTI-SEQUENCE COOKING
You can program up to four separate cooking sequences for each cooking
program. This is useful if you need to cook something at dierent power and
time settings (ex. 10 minutes at 100 P, 10 minutes at 80 P, 5 minutes at 20 P).
The maximum time for each cooking sequence is 60 minutes.
1. First, select the power level by pressing the MICRO POWER button. Then
use the PROGRAM DIAL to set the desired cooking time for that sequence.
You must select the time or you cannot go on to the next step.
2. Press the MICRO POWER button again to add another
sequence and use the PROGRAM DIAL to set time.
3. After you have set the desired number of sequences, press
the INSTANT/START button to begin cooking.
DELAYED START
1. To preset your microwave to begin cooking at a later time,
you must rst set the current time (see above).
2. Once the time has been set, select the cooking program
by pressing the MICRO POWER button.
3. Turn the PROGRAM DIAL to set your desired cooking time.
4. Press and hold the PRESET/CLOCK/DEFROST button to return to the current
time, then set the desired start time by turning the PROGRAM DIAL to
the hour, pressing the PRESET/CLOCK/DEFROST button to conrm the
hour, and setting the minutes by turning the PROGRAM DIAL.
5. Press the PRESET/CLOCK/DEFROST button to conrm the now activated delayed start
time; microwave will beep and the clock icon will ash. You may check your delayed
start time by pressing the PRESET/CLOCK/DEFROST button again at any time.
NOTE: The clock must be set in order for the Delayed Start feature to work.