Use and Care Manual
ENGLISH
9
HELPFUL TIPS
• The beverage cooler does not work.
It may not be properly connected to the power supply, or the voltage may be too low.
• The beverage cooler does not work as eciently as expected.
It may be caused by heavy frost, the temperature setting being too
warm, or by frequently opening and closing the door.
• It makes strange noises.
The noises may be caused by the beverage cooler not being stabilized. Make
sure the surface that the beverage cooler is on is at and rm. Noise can also be
caused by resonation between the beverage cooler and objects near it.
• The compressor keeps working for a long period of time.
The temperature may be too high. This can also be caused by the
frequent opening and closing of the doors, or by the door being left
open. Try moving the temperature setting between 1-3.
• Water is leaking from the bottom of the beverage cooler.
The drain tube is probably jammed. Contact a qualied technician to repair it.
• Heavy frost occurs in the back of the appliance.
Putting humid or hot drinks into the beverage cooler may cause this
problem. Or it may be caused by a lot of moisture in the environment.
• DO NOT place objects on top of the beverage cooler that are magnetic, heavy or lled
with water. Electronic components may not work properly if water gets inside. DO
NOT store valuables or objects sensitive to temperature inside the beverage cooler.
DEFROSTING
Heavy frost will eect the eciency and performance of the beverage cooler
and can create increased energy consumption. If the frost gets as thick as ¼
inch, you must defrost the beverage cooler. Follow these steps to defrost:
1. Remove all items from the beverage cooler.
2. Remove the shelves.
3. Unplug the power supply cord.
4. Open the doors and wait for the appliance to thaw completely.
5. Clean up the water with dry towels.
NOTE: DO NOT use any other equipment or method to force
the defrost process. It may ruin the cooling system.
DISCONNECTING THE APPLIANCE
After a power failure the beverage cooler can keep drinks
cool for several hours if doors are kept shut.
If the power fails, do not put additional drinks into the beverage cooler or open the door.
If you plan to have your power shut o for an extended period of time, make
sure to remove all perishable drinks from the beverage cooler rst.
If you stop use of your beverage cooler for an extended period
of time, unplug the appliance from the outlet.
Always wait at least ve minutes after unplugging the
power supply cord before plugging it back in.