LIGHTED PARTY FOUNTAIN™ Model # LPF-210 FOR HOUSEHOLD USE ONLY Read These Instructions Before Using This Unit! Safe These Instructions!
1 IMPORTANT PRECAUTIONS: Appliance Specifications: 40 Watts 120 Volts Important Precautions to Remember: A. NEVER immerse motor base in water. B. NEVER use near water. C. NEVER use an abrasive sponge or cloth on unit. D. NEVER use a scouring pad on the unit. E. NEVER leave unit unattended while in use. F. NEVER place anything other than the intended ingredients in the base bowl. G. Unplug unit from outlet when not in use and when cleaning. H.
2 IMPORTANT SAFEGUARDS (Continued) 10. DO NOT ATTEMPT TO OPEN BASE, THERE ARE NO SERVICEABLE PARTS. The light and cord to this product cannot be replaced. 11. The plug has one blade that is wider than the other, to reduce the risk of electrical shock; this plug is intended to fit into a polarized outlet only one way. 12. DO NOT refill or add more liquid while motor is running. Turn unit OFF first. It is preferable to be unplugged while assembling pieces. 13.
3 INTRODUCTION (Continued) The LIGHTED PARTY FOUNTAIN creates a beautiful effect for an exciting presentation to any occasion, such as; Weddings Birthdays Graduation Parties Business Gatherings Holidays Casual get togethers with friends and family Special Dinners Anytime!… INSTRUCTIONS FOR USE The LIGHTED PARTY FOUNTAIN™ is easy to use, just follow these simple instructions. 1. Your LIGHTED PARTY FOUNTAIN requires little assembly.
4 TROUBLESHOOTING PROBLEM Fountain not flowing Fountain is flowing unevenly Excessive Splashing Flow is intermittent, interrupted, not flowing properly POSSIBLE CAUSE/REMEDY Check the plug make sure it is properly plugged into outlet Unit is not LEVEL, level unit so that beverage is evenly distributed in the tier bowls to ensure level liquid in tiers. Make sure the splashguards are in place in the first and second tiers, and are securely attached to pegs.
5 ORDER OF ASSEMBLY ***There are 2 extra directional Extensions in case any are lost. Note: There are 2 splashguards. The splashguards are fitted into the first tier bowl and the second tier bowl. They are secured in place by the pegs in the tier bowl. (See page 6) Pegs in tier bowl lock splashguards into place securely.
6 ORDER OF ASSEMBLY (Continued) Upper Tier Bowl guard inserted On/Off Power Toggle Switch Extension Spouts When attaching these to the lower tier bowl, turn them in the direction facing the wall of the bowl to cut down on possible splashing. NOTE: Due to possible splashing, and depending on the beverage, place fountain on water proof surface or table covering. Use care in type of table cloth used for possible staining.
7 RETURNS & WARRANTY Should your unit not work or is damaged when you first take it out of the box, please return the unit immediately to the place of purchase. Should you have any other questions about the unit, please contact us at the numbers below between the hours of 8:00 am to 5:00 pm, Monday through Friday, Pacific Standard Time. Distributed by: The Helman Group, Ltd. 1621 Beacon Place Oxnard, Ca 93033 Phone: 805-487-7772 Fax: 805-487-9975 info@helmangroup.com www.helmangroup.
The Helman Group, Ltd 1621 Beacon Place Oxnard, CA 93033 (805) 487-7772 phone (805) 487-9975 fax Visit Us Online at www.helmangroup.com ©2007 The Helman Group, Ltd.
