User Manual

● It is recommended to do descaling twice a year: put 1 portion of vinegar and 2
times the amount of vinegar in the water tank, turn on the steam switch and allow it
to work for 5 minutes, then turn off the steam switch and pour out the remaining
mixed water in the water tank. After 10 hours, clean water can be filled for reuse.
Do not treat discarded electrical appliances as unclassified municipal waste, but
hand them over to an officially designated recycling center. This is conducive to
environmental protection.
Troubleshooting Guide
Problems
Possible Solutions to the Problem
The ironing machine does not heat up
● Check whether the plug is inserted correctly
or not.
● Check the power supply.
● Check the power button.
The ironing machine does not generate
steam
● Check whether the water level and water tank
are loaded correctly or not.
● Press the steam button hard.
● Place the ironing machine in an upright
position.
Water leaked from the water tank
● Ensure that the water does not exceed the
highest water line.
● Please ensure that the water tank water inlet
is properly closed.
● Always keep the ironing machine in an
upright position according to the operation
instructions provided.
There is a loud buzzing or pumping sound
when the steam engine works.
●Correction of water level; If there is no water
or the water level is low, add water to the water
tank.
Avoid discoloration of metal fittings on
clothes.
● Do not directly use the steam ironing
machine on metal fittings.
● Use steam carefully when metal fittings are
around.
* If the above methods cannot solve the problem, please contact the after-sales service
department for assistance.