User Manual

● In order to avoid circuit overload, it is recommended not to use the same socket
circuit with other electrical appliances.
● When unpacking the ironing machine, check the list of all items and parts you
receive to avoid being discarded.
Installation and Use
1. Press the buttons on both sides of the water tank and remove the water tank,
open the water inlet cover, and inject tap water (purified water is recommended)
into the water tank. Make sure that the water in the tank is at least one third and
does not exceed the maximum water level. Then put it back into the water tank.
2. During the use of the ironing machine, do not install the brush on the steam
head of the machine.
3. Connect the equipment to the power socket and switch on the power. Press the
power button, the power indicator will flash and the ironing machine will start
heating. When the indicator light stops blinking and turns to long light, it indicates
that preheating is complete, and you can start using it. When the power button is
pressed for a long time, the ironing machine can be turned off, and the indicator
light will go out at this time. After pressing and holding the steam switch, push
down the steam lock button to lock the steam button, the machine can generate
steam, and the hand can leave at this time. Push the steam lock button downward
to unlock the steam button.
4. This product has intelligent automatic shutdown function. When the user stops