HDPE POLY TANKS AND ACCESSORIES Drinking Water, Non Potable Water and Sewage Tank Solutions Above Ground Tanks Below Ground Tanks WATER & WASTE MANAGEMENT 2020
THE WORLD’S LEADING MANUFACTURER of polyethylene tanks, Norwesco has been producing polyethylene septic tanks since 1980. With that kind of experience, Norwesco offers you proven products that you can count on for years of dependable, trouble-free service. Norwesco septic tanks are backed by a full three-year warranty and have been approved by state and local health departments from coast to coast. Where applicable, Norwesco septic tanks have been approved by both IAPMO™ and CSA™.
TABLE OF CONTENTS Below Ground Tanks....................................................................................................... 4-8 Low Profile Septic Tanks......................................................................................................................................... 4 Bruiser Septic Tanks............................................................................................................................................... 4 Legacy Septic Tanks...................
BELOW GROUND TANKS LOW PROFILE SEPTIC TANKS 1000 2-MH Low Profile Septic Tank Norwesco Low Profile Septic Tanks are molded in one-piece, requiring no additional assembly, reducing installation time and effort. Molded-in structural support and stabilizing column • • • • • • Rotationally molded rugged, one-piece tank with no seams to leak. No assembly required, reducing installation time and effort. No special backfill or water filling required during installation. May be pumped dry during pump-outs.
BELOW GROUND TANKS LEGACY SEPTIC TANKS Norwesco Legacy (ribbed) septic tanks are molded in one piece, requiring no additional assembly, reducing installation time and effort. These tanks cannot be used as pump tanks and must be kept full at all times. • • • • • The rib design and placement provide superior structural integrity to the tank. Tanks 750 gallons and larger are available with PVC tees and gaskets supplied loose or with installed PVC tees and septic adapters.
BELOW GROUND TANKS HOLDING TANKS Typically used to store water – both potable and non-potable. Our holding tanks are ideal for instances when drinking water must be hauled in or if a well does not meet consumption needs. Norwesco holding tanks are manufactured using resins that meet FDA specifications to ensure safe storage of potable water. They can also be used as a large capacity septic tank or sewage holding tank depending on local codes. The end ribs will accept fittings up to 4” in size.
BELOW GROUND TANKS LEGACY CISTERN TANKS Norwesco’s below-ground water cisterns feature the same rugged, ribbed design found in our Legacy septic tanks and are lightweight for ease of transport and installation. Our cisterns are ideal for instances when drinking water must be hauled in or if a well does not meet consumption needs. Norwesco cisterns are manufactured using resins that meet FDA specifications to ensure safe storage of potable water.
BELOW GROUND TANKS BELOW GROUND TANK ACCESSORIES * One (1) tamper proof screw kit needed for 62408 lid. Two (2) Tamper proof screw kits needed for 63672 lid. Note: Accessory availability may vary according to manufacturing location. Please contact Norwesco Customer Service or your Norwesco distributor for specific details. Tank dimensions and capacities may vary slightly and are subject to change without notice. Manhole Extension (63833) & Lid (63672) PART NO.
ABOVE GROUND TANKS FLAT BOTTOM UTILITY TANKS Like the PCO tank, the Flat Bottom Utility tank can be used for many applications. It is the perfect choice when looking for a tank to put in the bed of a pickup truck. CAPACITY (GALLONS) LENGTH WIDTH OVERALL HEIGHT OUTLET/DRAIN SPECIFICATION FILL OPENING PART NO. 200 Low Profile* 300 Low Profile* 500 Low Profile* 60” 95” 130” 48” 56” 52” 20” 19” 23” - 8” 8” 8” 44875 44233 44643 * Limited availability.
ABOVE GROUND TANKS HORIZONTAL LEG TANKS Our horizontal leg water tanks feature built-in, graduated gallon indicators and slosh-proof lids. An installed bulkhead fitting is standard in the horizontal tanks. 125 Horizontal Leg Tank with Band LENGTH DIAMETER OVERALL HEIGHT OUTLET/DRAIN SPECIFICATION FILL OPENING PART NO. BAND PART NO.
ABOVE GROUND TANKS FREESTANDING TANKS The dimensions of Freestanding tanks allow them to fit through a conventional doorway. The design of the freestanding/self supporting tanks eliminate the need for a steel support frame.
ABOVE GROUND TANKS PCO TANKS PCO tanks are well suited for nursery, agricultural and lawn care applications. They feature self supporting legs and do not require any saddles or steel supports. Flat spots are molded into both ends to provide mounting areas for agitation equipment. 200 PCO Tank CAPACITY (GALLONS) LENGTH WIDTH OVERALL HEIGHT OUTLET/DRAIN SPECIFICATION FILL OPENING PART NO.
ABOVE GROUND TANKS VERTICAL STORAGE TANKS DIAMETER OVERALL HEIGHT OUTLET/DRAIN SPECIFICATION FILL OPENING PART NO.
ABOVE GROUND TANKS VERTICAL STORAGE TANKS BLACK OR DARK GREEN Norwesco water tanks are manufactured using resins that meet FDA specifications to ensure safe storage of potable water. The black or green color limits light penetration, which reduces the growth of water-borne algae. These tanks are rated at 8 pounds per gallon, which means that they are for WATER STORAGE ONLY! They should not be used for chemicals, fertilizers or any other product. Where applicable, the tanks will carry the NSF approval.
ABOVE GROUND TANKS VERTICAL STORAGE TANKS - BLACK OR DARK GREEN CAPACITY (GALLONS) 5000 5000 5500 6500 6600 7750 10000 11000 12000 15500 Peanut Can Tuna Can ∞ ∞ ∞ ∞ ∞ DIAMETER OVERALL HEIGHT FILL OPENING BOTTOM FITTING TOP FITTING BLACK PART NO.
ABOVE GROUND TANKS Hinged Lid shown open and closed HINGED LID This lid is manufactured from a co-polymer material for strength, durability and excellent chemical resistance. Our unique locking tab allows you to easily slip a padlock through it and secure your lid from theft or spills. The lid is interchangeable with a standard 16” lid and ring assembly if you choose to replace your existing lid. • • E Easy open/close - opens a full 180 degrees.
ABOVE GROUND TANKS LID ACCESSORIES & REPAIR KIT Lanyard Strainer Basket Poly Welding Gun DESCRIPTION PART NO.
ABOVE GROUND TANKS POLYPROPYLENE BULKHEAD FITTINGS / EPDM OR VITON GASKETS HOLE SIZE REQUIRED IN TANK FOR INSTALLATION DESCRIPTION ITEM CODE Type A Viton gasket for ½” and ¾” (62834 and 60401) PART NO.
ABOVE GROUND TANKS POLYPROPYLENE BULKHEAD FITTINGS / EPDM OR VITON GASKETS DESCRIPTION 2” Heavy duty double threaded polypropylene fitting HOLE SIZE REQUIRED IN TANK FOR INSTALLATION ITEM CODE PART NO.
MANUFACTURING LOCATIONS U.S. Hanford, CA Griffin, GA Sheldon, IA St. Bonifacius, MN Owego, NY Lancaster, OH Washington Court House, OH Shawnee, OK Fairfield, TX Tooele, UT Washougal, WA Canada Edmonton, AB WARRANTY Norwesco offers a three (3) year warranty from date of manufacture on tanks shown in this brochure with the exception of our Low Profile Tanks, which have a five (5) year warranty from the date of manufacture.
