Harrow Rake Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing a NorTrac product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This harrow rake is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Packaging Contents .............................................................................................................................. 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information .................
Intended Use The NorTrac Harrow Rake cultivates and prepares seed beds and rakes up dead foliage. Pull behind a tractor, jeep, pickup, ATV, or 4-wheeler to effectively level dirt racing tracks and playing fields. Packaging Contents • Fence • Beam • Plunger Rod • Tow Bar • Owner’s Manual Technical Specifications Property Size Harrow Teeth Size Hitch Type #42016 4ft. W x 7.5ft. L 3.5in.L x 0.375in.dia Tow Ring #42017 4.5ft. W x 5.5ft. L 3.5in.L x 0.375in.dia Tow Ring #42018 6ft. W x 8ft. L 3.
• Do not use the product where there is a risk of causing a fire or an explosion; e.g., in the presence of flammable liquids, gases, or dust. The product can create sparks, which may ignite the flammable liquids, gases, or dust. • Do not allow the product to come into contact with an electrical source. The tool is not insulated and contact will cause electrical shock. • Keep children and bystanders away from the work area while operating the tool. Do not allow children to handle the product.
Main Parts of Harrow Rake Subassembly A. Fence B. Tow Bar C. Beam D. Plunger Rod Assembly Instructions Open the carton and lay out the contents to be sure they match the Parts Diagram and List. Follow the steps below to assemble the harrow rake. Again, refer to the Parts Diagram and List for the reference numbers mentioned. 1. Lay the harrow onto ground and stretch it out. 2. Connect the Tow Bars (#2) to the beam (#3). See Fig 1. 3. Connect the Tow Bars (#2) to the Tow Ring (#1). See Fig 2.
4. Insert the Plunger Rod (#4) into the rings on the Beam (#3). See Fig 3 and Fig 4. 5. Connect the Fence (#5) to the Plunger Rod (#4). See Fig 5. 6. The harrow rake is ready for use. Before Each Use Before each use, be sure the harrow rake is in proper working condition. If any tines have been damaged, repair or replace the fence. Operating Instructions Connect the harrow rake to the tractor/ATV/UTV using the Tow Ring.
After Each Use After each use, clean the tines and repair any that have been damaged. Be sure the unit is in proper working condition before storing it. Maintenance It is recommended that the general condition of any harrow rake be examined before it is used. Keep your harrow rake in good repair by adopting a program of conscientious repair and maintenance. If any abnormal vibrations or noise occurs, have the problem corrected before further use. Parts Diagram Parts List Part No.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the NorTrac product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
