Product Manual

Step 3 – Assemble Sight Level Oil Gauge/Thermometer

to Reservoir as shown using a 6mm Hex Wrench.

Torque Bolts to 2-4 FT LBS. (24-48 IN LBS.)

Do Not Overtighten

Notes: Make sure Small gasket is pushed up to bolt head.

Large T-gasket is flat against the reservoir.

Text should be right side up.

Step 2 – Insert Magnetic Drain Plug.

Reservoir Assembly

Step 1 – Install Breather Cap

Rotate cap clockwise to seal reservoir.

40-MICRON

BREATHER

CAP

SIGHT LEVEL

GAUGE/

THERMOMETER

MAGNETIC

DRAIN PLUG

Larger

T-gasket

Small rubber

gasket

Tighten With

3/8” Hex Wrench