Product Manual

Summary of Safety Information
2
Always make sure safety label is in
place and in good condition. If the
safety label is missing or not legible,
order new a new label or unsafe
operation could result.
To order replacement safety label, call NorTrac Product Support at 1-800-521-0438.
Never remove the hydraulic fill cap while in operation. Hot oil can escape causing severe burns.
Allow the hydraulic system to cool completely before removing the hydraulic cap.
Do not touch the exterior of the reservoir. It can become hot during operation.
Relieve system pressure before changing or adjusting hydraulic system components.
Ensure all components in the hydraulic system are appropriately sized and rated for the
application.
Check the hydraulic system (hoses, tubing, clamps/fittings, pump and cylinder carefully before
each use.
Do not operate the hydraulic system or its attachments with frayed, kinked, cracked or damaged
hydraulic hoses, fittings or tubing.
Do not attempt to add more hydraulic fluid during operation to extend the hydraulic capacity.
READ and UNDERSTAND the Owner’s Manual completely before using the Hydraulic
Reservoir.
Use only in accordance with the Owner’s manual instruction.
Replace this label if damaged or destroyed. Consult Owner’s Manual for ordering instructions.
WARNING