Product Manual

Page 6 of 25
Do not overreach. Keep proper footing and balance at all times.
Do not use the tool when tired or under the influence of drugs, alcohol or medication.
Remove keys or wrenches before connecting the tool to an air supply, power supply, or turning on
the tool. A wrench or key that is left attached to a rotating part of the tool may cause personal
injury.
Secure the work with clamps or a vise instead of your hand when practical. This safety precaution
allows for proper tool operation using both hands.
PRODUCT USE AND CARE
Do not force the harrow. Products do a better and safer job when used in the manner for which
they are designed. Plan your work, and use the correct product for the job.
Check for damaged parts before each use. Carefully check that the harrow will operate properly
and perform its intended function. Replace damaged or worn parts immediately. Never operate
the harrow with a damaged part.
Store the harrow when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.
Use only accessories that are recommended by the manufacturer for use with your harrow.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure
than the tool itself.
Keep guards in place and in working order. Never operate the product without the guards in
place.
Specific Operation Warnings
WARNING
CRUSHING AND PINCHING HAZARD
This implement is heavy. Use extreme caution when handling various parts of the machine.
Hands, fingers, and other body parts could be crushed or pinched between tractor and implement.
DO NOT stand between the tractor and the implement when the tractor is in gear.
Operate controls from the tractor seat only.
Make sure the parking brake is engaged before going between tractor and implement.
DO NOT service equipment while attached to tractor.
To prevent serious injury or death:
Read and understand the owner’s manual before operating, servicing, or repairing equipment.
Stop the engine, remove the key, and set the brake before the dismounting tractor.
DO NOT operate without guards in place and in good, working condition.
Never allow riders on the equipment.
Keep bystanders at least 50 feet away while operating.
DO NOT operate or transport on steep inclines.
DO NOT service or go under the implement when the tines are in the up position.
DO NOT exceed this implement’s maximum speed of 5 MPH. Exceeding this speed may result in
loss of control during transport or braking.