Product Manual

Page 8 of 15
Check for ditches, stumps, holes, or other obstacles that could cause the tractor to roll.
Be sure tractor tires and rims are in good condition. Inflate tires to proper air pressure.
All persons should be at least twenty-five feet (25') away during operation. Clear the area of
helpers, bystanders, and especially children.
Do NOT allow anyone to stand between the hitch and implement.
It is recommended that only tractors with wide front axles use the plow. Tricycle front wheel
arrangements are inherently unstable and can cause rollover accidents.
Make sure all safety stickers are installed and in good condition. Replace if damaged.
Check that all equipment is properly installed and securely attached to the tractor.
Operation
If you have any questions regarding the proper operation of this plow, contact your dealer or the
manufacturer.
1. Set the plow on the ground. Plow about twenty feet, or until you can see what adjustment the
plow needs.
2. Adjust tractor’s top link and rear landslide heel to set the plow frame level end-to-end.
3. The frame should also be level when in the ground for in-furrow operation depending on the
furrow depth.
Front End Ballast
Front end ballast may be required for stability and steering control when weight is transferred to the
back tires as the plow is raised. As a general guide: ballast the tractor (less plow) so that
approximately 1/3 of the tractor weight is on the front tires.
When a mounted plow is raised, the resulting load on the front wheels should be less than 20% of the
tractor’s weight. Add additional ballast as required for stability during operation and transportation.
A heavy load can cause instability in driving a tractor. Make sure the front of the tractor is properly
counterbalanced with weights. The tractor front end ballast may not always maintain the tractor
stability if the tractor is operated on rough terrain at high speeds. In such cases, reduce speed and
exercise caution especially around turns. An unstable tractor could steer badly and possibly tip over,
causing injury or death.
It is essential that everyone involved in the operation, transportation, maintenance, and storage of this
equipment be aware, concerned, prudent, and properly trained in safety.
After Each Use
After Each Use
Remove large debris such as clumps of dirt, grass, crop residue, etc., from the plow.
Inspect the plow and replace worn or damaged parts