Product Manual

3-PT. PTO ROUGH CUT MOWER OWNER’S MANUAL

6 of 14

Before Each Use

WARNING:

• Before each use, perform the maintenance described in the maintenance section

• Read, understand, and follow the information on safety, preparation, starting and stopping

safety, operational safety, operational safety and transport safety warning sections of this

manual

• With the tractor running, lower the mower into working position.

• With the tractor at idle RPM, engage the PTO, and slowly advance the throttle to pproximately

540 PTO RPM.

Note: Do not allow the tractor engine or the mower to bog down or stall. This causes

unnecessary wear and tear on the mower and the tractor. If this continues to occur, reduce the

ground speed and/or raise the cutting height of the mower.

NEVERATTEMPT TO CLEAN OUT A CLOGGED DISCHARGE CHUTE UNLESS THE MOWER

BLADES HAVE COMPLETELY STOPPED AND THE TRACTOR HAS BEEN SHUT OFF.

Safety Decal Locations

Good safety requires that you familiarize yourself with thisunit’s safety decalwarnings. The

positioning of the labels on the equipment is shown on the diagram on the following page. The

numbered labels follow (1-8).

3-PT. PTO ROUGH CUT MOWER OWNER’S MANUAL

7 of 14

2 4