Product Manual

Page 9 of 28
Table 1 – Tiller Parts List
1
Gimbals
Z1
bevel
2
First shaft
Z2
gear
3
Second shaft
Z3
cylindrical
4
Third shaft
Z4
5
Fourth shaft
Z5
gear
6
Blade arbor spline shaft
Z6
7
Left blade arbor
8
Right blade arbor
The tiller has a completely metal structure consisting of three parts: the transmission mechanism, the
working mechanism, and the auxiliary mechanism. The transmission mount mainly consists of the
gimbals, the assembly, and a gear box. The working unit consists of the blade arbor assembly and the
middle plough body unit. The auxiliary demount consists of the machine cover, the drag tiller, and the
frame suspending mount.
The gimbals assembly (see Figure 2 and Table 2) and grease nipple are installed on the cross shaft in
order to fill grease for lubrication of the needle bearings inside the cross shaft.
Figure 2 - Gimbals Assembly
Table 2 - Gimbals Assembly Parts List
Ref
Name
Part Number
Quantity
1
hinged bolt
ZT-02
4
2
split pin 3 ×25
GB/T91-2000
5
3
washer 14
GB/95-2002
4
4
hinged clamp
ZT-01
2