Product Manual

Page 16 of 28

Reference Number

Part Number

Name

Qty.

GB/T5782

Bolt M20×100

1GQN-180.402

Pull rod

1GQN-180.301

Axis pin

1GQN-180.330

GB/T97.1

Washer 20

1GQN-180.303

Spring Ⅱ

1GQN-180.304

Spring Ⅰ

1GQN-180.302

Adjusting pull rod

Before Each Use

Oil is NOT included. Before using, add oil to the central gear box. Consult owner’s manual for

lubricating and operating instructions.

Operating Checklist

Hazard control and accident prevention are dependent upon the awareness, concern, prudence, and

proper training involved in the operation, transport, storage, and maintenance of the Rotary Tiller.

Therefore, it is absolutely essential that no one operates the Rotary Tiller without first having read,

fully understood, and become totally familiar with this Owner’s Manual.

Make sure the operator has paid particular attention to:

 Important Safety Information

 Assembly Instructions

 Adjustments

 Operating Instructions

 Maintenance

Pre-Field Inspection

Make the following inspections with the tiller attached to a tractor:

1. Fully inspect the tractor safety equipment to make sure it is in good working condition.

2. Inspect the tiller for loose bolts and nuts. Tighten all loose bolts and nuts.

3. Carefully raise and lower the implement to ensure the drawbar, tires, and other equipment on

the tractor do not contact the tiller frame.

4. Check for and remove foreign objects wrapped around the spike teeth and frame. Block the

tiller up before removing any objects.

5. Check for missing, bent, broken, and worn spike teeth. Replace any spike teeth as necessary.

6. Verify that the tiller is level from left to right and front to back.